How To Reset the Change Oil Light of the Most Popular American Brands?

Are you wondering how to reset the change oil light of the most popular American brands? Resetting the change oil light yourself is a great way to save money and keep your vehicle running smoothly.

With a few simple steps, you can easily reset the oil light on the most popular brands such as Ford, Chevrolet, Jeep, and Mercedes Benz. In this article, we will provide you with detailed instructions on how to reset the change oil light of these popular American car brands.

Why Does the Change Oil Light Come On?

The change oil light is a dashboard warning light that indicates that it’s time to change the engine oil in a vehicle. It typically comes on after a certain number of miles driven or a certain period of time since the last oil change.

The light is triggered by a sensor that monitors the engine oil level and pressure. If the oil becomes too dirty or low, or if there is a problem with the oil pressure or sensor, the light comes on to alert the driver to the issue.

Ignoring the change oil light can lead to engine damage, so it’s important to address the underlying issue promptly.

How To Reset the Change Oil Light of the 6 Most Popular American Car Brands?

1. Toyota

1. To reset the oil change light, insert the key into the ignition and turn it to the “on” to the accessory power position without starting the engine.
2. Press and hold the odometer reset button until the odometer reading changes to show “000000”.
3. Release the odometer reset button and turn the ignition off.
4. Hold down the odometer reset button and turn the ignition back from the ”off” position.
5. Continue to hold down the reset button until the maintenance light turns off (usually about 10 seconds).
6. Release the reset button and turn the ignition off.
7. Turn the ignition back on to make sure the change oil light is no longer illuminated.

2. Honda

1. Turn the ignition to the “on” position, but do not start the engine.
2. Press the “Select/Reset” button until the odometer display shows the engine oil life percentage.
3. Press and hold the “Select/Reset” button until the engine oil life percentage starts to blink.
4. Release the “Select/Reset” button and then press and hold it again for about 10 seconds.
5. The engine oil life display percentage should reset to “100%” and the change oil light should turn off.
6. Turn the ignition off and then start the engine to confirm that the change oil life light is no longer illuminated.

3. Chevrolet

1. Turn the ignition key to the “on” position without starting the engine.
2. Press the gas pedal three times within five seconds.
3. Wait for the change oil light to flash, indicating that the system has been reset.
4. Turn the ignition off and then start the engine to confirm that the change oil light is no longer illuminated.

4. Ford

1. Insert the key into the ignition and turn it to the “on” position without starting the engine.
2. Press the brake pedal and the accelerator pedal at the same time and hold them down for about 20 seconds.
3. The change oil light should begin to flash, indicating that the system has been reset.
4. Release the brake and accelerator pedals and turn the ignition off.
5. Wait a few seconds and then start the engine to confirm that the change oil light is no longer illuminated.

5. Mercedes-Benz

1. Turn the ignition key to the “on” position, but do not start the engine.
2. Use the controls on the steering wheel to navigate to the “Assyst Plus” menu.
3. Use the “+” or “-” button to select “Service A” or “Service B,” depending on which service you have performed.
4. Press and hold the “OK” button until the display shows “Confirm?”.
5. Release the “OK” button and then press and hold it again until the display shows “Service confirmed”.
6. Turn the ignition off and then start the engine to confirm that the change oil light is no longer illuminated.

6. Jeep

1. Turn the ignition to the “on” position, but do not start the engine.
2. Use the buttons on the steering wheel to navigate to the “Settings” menu.
3. Select “Maintenance” and then “Oil Life”.
4. Use the “+” or “-” button to set the oil life to “100%”.
5. Press and hold the “OK” button until the display shows “Oil Life Reset”.
6. Turn the ignition off and then start the engine to confirm that the change oil light is no longer illuminated.

Note that the exact procedure for resetting the change oil light may vary slightly depending on the model and year of your particular vehicle, so be sure to consult your owner’s manual or visit the vehicle information center for specific instructions.

Final Thoughts: How To Reset the Change Oil Light of The Most Popular American Brands?

In conclusion, resetting a car’s change oil light is an essential part of basic car maintenance and owners of popular American brands can easily reset this light on their own.

Additionally, if you are ever unsure or intimidated by the task, make sure to visit a professional mechanic. With these simple steps in mind, you’ll be able to reset your car’s oil change light like a pro!

Check out our blog on engine oils for more information.

Frequently Asked Questions