If you own a Yard Machines lawn mower, you know the importance of regular oil changes. But do you know the location of the yard machine lawn mower’s oil drain plug?
It’s typically located underneath the engine block, close to the crankshaft.
If you can’t find it there, consult your lawn mower’s owner manual.
With this burning question out of the way, let’s explore how to replace the engine oil in your lawn mower.
Here’s what we’ll cover:
How To Replace Engine Oil in a Lawn Mower by Siphon Pump Method?
You will need the following tools to replace engine oil fill with a siphon pump.
- Drain pan
- Recommended oil fill
- Siphon pump
- Rag
1. Park Mower on a Flat Surface
Park your lawn mower on a level surface and turn off the engine. Wait for the engine to cool down before proceeding.
2. Remove Spark Plug Wire
Remove the spark plug wire from the spark plug to reduce the risk of accidental engine starting while you’re working on it.
3. Clean Debris
Wipe the entire area to ensure the removal of debris.
4. Insert Siphon Tube
Remove the dipstick from the oil fill port and insert the siphon tube into the port. Put the other end of the siphon tube into a container. Now, rest the tube’s end at the container’s bottom.
the oil fill port and insert the siphon tube into the port. Put the other end of the siphon tube into a container and make sure that the end of the tube is resting at the bottom of the container.
5. Drain Oil Using a Siphon Pump
Pump the handle until the oil flows out of the drain plug and into the pan. Remove the siphon hose after the oil drain and replace the drain plug.
6. Put the Pump Back Upright
Put the siphon tube back in an upright position.
7. Refill the Lawn Mower
Next, you have to fill the oil. Do consult the manufacturer’s guidelines to know about the recommended oil. The manual also covers the most suitable grade and the right amount. Fill the oil considering all those parameters.
8. Wait for Oil To Settle
Now, wait a couple of minutes for the oil settlement. Afterward, recheck the level and add more if required.
9. Clean the Work Station
After replacing engine oil, make sure to dispose of any cloth or paper you have used during the process. Clean up the oil spilled during the changing process.
How To Replace Engine Oil in a Lawn Mower by Dipstick Tube Method?
1. Place Mower on a Flat Surface
First, place the lawn mower on a leveled ground to measure the oil level accurately
2. Remove Spark Plug Wire
Remove the spark plug wire from the plug to prevent the accidental start of the engine.
3. Clean Debris
Make sure to clean the area around the oil fill.
4. Place a Container
Next, place a container to catch the old oil. Try to place it on the other side of the air filter to avoid contamination by old oil. Carefully tip the mower for the container to collect all the oil.
5. Bring Mower Back to Upright Position
Bring the mower to a straight position after removing the oil.
6. Refill the Lawn Mower
Fill the machine with fresh oil as the manufacturer recommends in the manual.
7. Wait for Oil To Settle
Wait for the oil to settle down for an accurate reading.
8. Reattach the Spark Plug Wire
Connect the spark plug wire to the plug back and refuel it afterward. And you are done!
Final Thoughts: Where Is Yard Machines Lawn Mower Oil Drain Plug?
The oil drain plug on a Yard Machines lawn mower is located on the underside of the mower, near the back. Always check your lawn mower’s oil level regularly and change the oil when necessary.
For more engine-oil-related queries, explore our blog today.
